Two-Level Flat Floor Plans in Wood Green, North London

Home » Case Studies » Two-Level Flat Floor Plans in Wood Green, North London

Two-Level Flat Floor Plans in Wood Green, North London

Wood Green, North London
October 2025

Two-Level Flat Floor Plans in Wood Green, North London
Wood Green, North London

Results at a Glance

Site access coordinated and survey visit scheduled for a two-level flat above a shop

Draft existing floor plans issued for review

Measurement discrepancy identified and addressed to protect drawing accuracy

Final drawings issued in CAD (DWG) and PDF formats

The Challenge

The client needed measured floor plans for a flat arranged over two levels above a shop in Wood Green, North London. Access needed to be coordinated with the occupiers, and the team had to plan around practical entry constraints (including an intercom issue) to ensure the surveyor could get in smoothly.

During drawing production, the team identified that recorded horizontal window dimensions on the front elevation were not adding up correctly against the overall room width. This was flagged transparently as a mistake on our side, with an offer to revisit the property to verify measurements before issuing the final set. The client and their planning consultant were kept in the loop throughout, balancing accuracy needs with the intended use of the drawings.

Our Solution

PlanCraftDaily confirmed scope for measured floor plans and arranged a survey slot, sharing surveyor contact details and an arrival window in advance. Access was coordinated via the occupiers and the planning consultant, with clear communication to avoid delays on the day.

Following the site visit, the team produced a draft set of existing floor plans and issued them for review. During internal checks, a discrepancy was identified in the recorded window dimensions relative to the room width. The issue was acknowledged promptly and the team proposed a follow-up verification visit to ensure the highest accuracy prior to final issue.

Once the drawings were confirmed as suitable for the client’s needs, the final drawing pack was completed and issued, including CAD files for downstream design coordination.

What We Delivered

Measured existing floor plans (two levels)

Draft floor plan drawing pack for client review

Final floor plan drawing pack (revised/verified as needed)

CAD (DWG) floor plan files

PDF floor plan files

Outputs Delivered

DWG

PDF

The Process

Agreeing Scope, Fee and Friday Access

We confirmed the requirement for measured floor plans for a two-level flat above a shop, including who would coordinate access on site. Key contacts were identified early (client, planning consultant, and occupiers) so the survey could be arranged without unnecessary back-and-forth.

On-Site Survey

A survey slot and arrival window were agreed and shared in writing, alongside surveyor contact details. Access arrangements were coordinated via the occupiers and planning consultant, including contingency planning for entry issues, to keep the visit on track and minimise disruption.

Cross-Checking Before Leaving

The surveyor attended site and captured measurements needed to produce accurate existing floor plans for both levels. The focus was on reliable, survey-based dimensions suitable for technical use, rather than marketing-style plans, ensuring the drawings reflected the property’s real layout.

Turning Survey into Plans and Elevations

Draft floor plans were produced and issued for review. During checks, a discrepancy was identified in recorded dimensions (window widths vs overall room width). This was flagged transparently, and a verification visit was proposed to confirm measurements before issuing the final set.

Draft Review and Final Handover

Once the drawings were confirmed as acceptable for the project’s purpose, the final pack was issued. Deliverables included both PDF drawings and CAD (DWG) files, supporting onward coordination with consultants and ensuring the plans could be reused and updated as the project progressed.

Project Metrics

Two levels

Storeys surveyed

Flat above a shop

Property type

29 September 2025

Survey date scheduled

DWG + PDF

Formats issued

Results & Impact

The client received a completed set of measured floor plans for the two-level flat, with the drafting process supported by clear scheduling and access coordination. A measurement inconsistency was identified during review and handled transparently to protect accuracy. The final deliverables were issued in CAD (DWG) and PDF formats for straightforward use by the wider project team.